Application of microfluidic assays for cardiovascular disease markers in early warning and rapid diagnosis / 中华预防医学杂志

Cardiovascular disease is a major threat to human health and has become the leading cause of death worldwide; therefore, early diagnosis and treatment are of great value. Due to its miniaturization, integration, and ease of operation, microfluidic technology enables the rapid, multi-target detection of cardiovascular disease markers and significantly facilitates the early and rapid diagnosis of cardiovascular disease. This article reviews the research progress of microfluidics in cardiovascular disease detection, analyzes its advantages and weaknesses in the rapid detection of protein, lipid, and nucleic acid biomarkers, hopes to provide a reference to promote the quick detection technology of cardiovascular disease, and thus proposes new considerations for the early management of cardiovascular disease.

Microfluidic Chip and Flow Cytometry for Examination of the Antiplatelet Effect of Ticagrelor / 中国医学科学院学报

Objective To examine the antiplatelet effect of ticagrelor by microfluidic chip and flow cytometry under shear stress in vitro. Methods Microfluidic chip was used to examine the effect of ticagrelor on platelet aggregation at the shear rates of 300/s and 1500/s.We adopted the surface coverage of platelet aggregation to calculate the half inhibition rate of ticagrelor.The inhibitory effect of ticagrelor on ADP-induced platelet aggregation was verified by optical turbidimetry.Microfluidic chip was used to construct an in vitro vascular stenosis model,with which the platelet reactivity under high shear rate was determined.Furthermore,the effect of ticagrelor on the expression of fibrinogen receptor (PAC-1) and P-selectin (CD62P) on platelet membrane activated by high shear rate was analyzed by flow cytometry. Results At the shear rates of 300/s and 1500/s,ticagrelor inhibited platelet aggregation in a concentration-dependent manner,and the inhibition at 300/s was stronger than that at 1500/s (both P<0.001).Ticagrelor at a concentration ≥4 μmol/L almost completely inhibited platelet aggregation.The inhibition of ADP-induced platelet aggregation by ticagrelor was similar to the results under flow conditions and also in a concentration-dependent manner.Ticagrelor inhibited the expression of PAC-1 and CD62P. Conclusion We employed microfluidic chip to analyze platelet aggregation and flow cytometry to detect platelet activation,which can reveal the responses of different patients to ticagrelor.

Study on Platelet Adhesion and Aggregation Induced by Gradient Shear Stress Using Microfluidic Chip Technology / 中国实验血液学杂志

OBJECTIVE@#To study the effect of gradient shear stress on platelet aggregation by microfluidic chip Technology.@*METHODS@#Microfluidic chip was used to simulate 80% fixed stenotic microchannel, and the hydrodynamic behavior of the stenotic microchannel model was analyzed by the finite element analysis module of sollidwork software. Microfluidic chip was used to analyze the adhesion and aggregation behavior of platelets in patients with different diseases, and flow cytometry was used to detect expression of the platelet activation marker CD62p. Aspirin, Tirofiban and protocatechuic acid were used to treat the blood, and the adhesion and aggregation of platelets were observed by fluorescence microscope.@*RESULTS@#The gradient fluid shear rate produced by the stenosis model of microfluidic chip could induce platelet aggregation, and the degree of platelet adhesion and aggregation increased with the increase of shear rate within a certain range of shear rate. The effect of platelet aggregation in patients with arterial thrombotic diseases were significantly higher than normal group (P<0.05), and the effect of platelet aggregation in patients with myelodysplastic disease was lower than normal group (P<0.05).@*CONCLUSION@#The microfluidic chip analysis technology can accurately analyze and evaluate the platelet adhesion and aggregation effects of various thrombotic diseases unde the environment of the shear rate, and is helpful for auxiliary diagnosis of clinical thrombotic diseases.

Detection of IgG protein in human urine based on vertical flow paper microfluidic chip / 生物工程学报

The kidney is the body's most important organ and the protein components in urine could be detected for diagnosing certain diseases. The amount of IgG protein in urine could be used to determine the degree of kidney function damage. IgG protein in human urine was detected by vertical flow paper-based microfluidic chip, double-antibody sandwich immunoreaction, and cell phone image processing. The results showed that using an IgG antibody concentration of 500 μg/mL and a gold standard antibody concentration of 100 μg/mL, the image signal showed a good linear relationship in the range of IgG concentration of 0.2-3.2 μg/mL, with R2=0.973 3 achieved. A complete set of detection devices were designed and the detection method showed good non-specificity.

Cell-loaded hydrogel microspheres based on droplet microfluidics: a review / 生物工程学报

Droplet microfluidics technology offers refined control over the flows of multiple fluids in micro/nano-scale, enabling fabrication of micro/nano-droplets with precisely adjustable structures and compositions in a high-throughput manner. With the combination of proper hydrogel materials and preparation methods, single or multiple cells can be efficiently encapsulated into hydrogels to produce cell-loaded hydrogel microspheres. The cell-loaded hydrogel microspheres can provide a three-dimensional, relatively independent and controllable microenvironment for cell proliferation and differentiation, which is of great value for three-dimensional cell culture, tissue engineering and regenerative medicine, stem cell research, single cell study and many other biological science fields. In this review, the preparation methods of cell-loaded hydrogel microspheres based on droplet microfluidics and its applications in biomedical field are summarized and future prospects are proposed.

Visualization analysis of microfluidics research status / 生物医学工程学杂志

Microfluidics is the science and technology to manipulate small amounts of fluids in micro/nano-scale space. Multiple modules could be integrated into microfluidic device, and due to its advantages of microminiaturization and controllability, microfluidics has drawn extensive attention since its birth. In this paper, the literature data related to microfluidics research from January 1, 2006 to December 31, 2021 were obtained from Web of Science Core Collection database. CiteSpace 5.8.R3 software was used for bibliometrics analysis, so as to explore the research progress and development trends of microfluidics research at home and abroad. Based on the analysis of 50 129 articles, it could be seen that microfluidics was a hot topic of global concern, and the United States had a certain degree of authority in this field. Massachusetts Institute of Technology and Harvard University not only had a high number of publications, but also had strong influence and extensive cooperation network. Combined with ultrasonic, surface modification and sensor technology, researchers constructed paper-based microfluidic, droplet microfluidic and digital microfluidic platforms, which were applied in the field of immediate diagnosis, nucleic acid and circulating tumor cell analysis of in vitro diagnosis and organ-on-a-chip. China was one of the countries with a high level of research in the field of microfluidics, while the industrialization of high-end products needed to be improved. As people's demand for disease risk prediction and health management increased, promoting microfluidic technological innovation and achievement transformation is of great significance to safeguard people's life and health.

Design, simulation and application of multichannel microfluidic chip for cell migration / 生物医学工程学杂志

Cell migration is defined as the directional movement of cells toward a specific chemical concentration gradient, which plays a crucial role in embryo development, wound healing and tumor metastasis. However, current research methods showed low flux and are only suitable for single-factor assessment, and it was difficult to comprehensively consider the effects of other parameters such as different concentration gradients on cell migration behavior. In this paper, a four-channel microfluidic chip was designed. Its characteristics were as follows: it relied on laminar flow and diffusion mechanisms to establish and maintain a concentration gradient; it was suitable for observation of cell migration in different concentration gradient environment under a single microscope field; four cell isolation zones (20 μm width) were integrated into the microfluidic device to calibrate the initial cell position, which ensured the accuracy of the experimental results. In particular, we used COMSOL Multiphysics software to simulate the structure of the chip, which demonstrated the necessity of designing S-shaped microchannel and horizontal pressure balance channel to maintain concentration gradient. Finally, neutrophils were incubated with advanced glycation end products (AGEs, 0, 0.2, 0.5, 1.0 μmol·L -1), which were closely related to diabetes mellitus and its complications. The migration behavior of incubated neutrophils was studied in the 100 nmol·L -1 of chemokine (N-formylmethionyl-leucyl-phenyl-alanine) concentration gradient. The results prove the reliability and practicability of the microfluidic chip.

Isothermal amplification technology based on microfluidic chip / 生物工程学报

Polymerase chain reaction (PCR) is the gold standard for nucleic acid amplification in molecular diagnostics. The PCR includes multiple reaction stages (denaturation, annealing, and extension), and a complicated thermalcycler is required to repetitively provide different temperatures for different stages for 30-40 cycles within at least 1-2 hours. Due to the complicated devices and the long amplification time, it is difficult to adopt conventional PCR in point-of-care testing (POCT). Comparing to conventional PCR, isothermal amplification is able to provide a much faster and more convenient nucleic acid detection because of highly efficient amplification at a constant reaction temperature provided by a simple heating device. When isothermal amplification is combined with microfluidics, a more competent platform for POCT can be established. For example, various diagnosis devices based on isothermal amplification have been used to rapidly and conveniently detect SARS-CoV-2 viruses. This review summarized the recent development and applications of the microfluidics-based isothermal amplification. First, different typical isothermal amplification methods and related detection methods have been introduced. Subsequently, different types of microfluidic systems with isothermal amplification were discussed based on their characteristics, for example, functionality, system structure, flow control, and operation principles. Furthermore, detection of pathogens (e.g. SARS-CoV-2 viruses) based on isothermal amplification was introduced. Finally, the combination of isothermal amplification with other new technologies, e.g. CRISPR, has been introduced as well.

Tactic movement of microalgae and its application in targeted transport: a review / 生物工程学报

Microalgae are a group of photosynthetic microorganisms, which have the general characteristics of plants such as photosynthesis, and some species have the ability of movement which resembles animals. Recently, it was reported that microalgae cells can be engineered to precisely deliver medicine-particles and other goods in microfluidic chips. These studies showed great application potential in biomedical treatment and pharmacodynamic analysis, which have become one of the current research hotspots. However, these developments have been rarely reviewed. Here, we summarized the advances in manageable movement exemplified by a model microalgae Chlamydomonas reinhardtii based on its characteristics of chemotaxis, phototaxis, and magnetotaxis. The bottlenecks and prospects in the application of microalgae-based tactic movement were also discussed. This review might be useful for rational design and modification of microalgal manageable movement to achieve targeted transport in medical and other fields.

Advances of using microfluidic chips for research and diagnosis of pulmonary inflammatory diseases / 生物工程学报

Microfluidic chip technology integrates the sample preparation, reaction, separation and detection on a chip. It consists a network of microchannels, which controls the whole system through fluid. With the advantages of portability, high throughput, and the ability to simulate the microenvironment in vivo, it has a broad application prospect in the research of disease diagnosis, pathogenesis and drug screening. Pulmonary inflammatory disease is a common disease usually caused by bacterial, viral and fungal infections. Early pneumonia is often difficult to diagnose due to lack of obvious respiratory symptoms or the symptoms are mostly atypical, but the disease progresses rapidly. Recently, microfluidic chip technology has been increasingly used to the study of pulmonary inflammatory diseases. In particular, it has been used to develop a "lung-on-a-chip" model, which can reproduce the key structure, function and mechanical properties of human alveolar capillary interface (i.e., the basic functional unit of a living lung), and well simulate the alveoli in vitro. Compared with the cell and animal models, this multifunctional micro experimental platform has great advantages. This article summarizes the advances of using microfluidic chips for the research and diagnosis of pulmonary inflammatory diseases, with the aim to provide new ideas for researchers in this area.

Technology development and instrumentation of a high-throughput and automated microbial microdroplet culture system for microbial evolution and screening / 生物工程学报

Since microdroplets are able to be generated rapidly in large amount and each droplet can be well controlled as an independent micro-cultivator, droplet microfluidic technology can be potentially used in the culture of microorganisms, and provide the microbial culture with high throughput manner. But its application mostly stays in the laboratory-level building and using for scientific research, and the wide use of droplet microfluidics in microbial technology has been limited by the key problems that the operation for microdroplets needs high technical requirements with wide affecting factors and the difficulties in integration of automatic microdroplet instrumentation. In this study, by realizing and integrating the complicated operations of droplet generation, cultivation, detection, splitting, fusion and sorting, we design a miniaturized, fully automated and high-throughput microbial microdroplet culture system (MMC). The MMC can be widely used in microbial growth curve test, laboratory adaptive evolution, single factor and multi-level analysis of microbial culture, metabolite detection and so on, and provide a powerful instrument platform for customized microbial evolution and screening aiming at efficient strain engineering.

Extraction of exosome by gel electrophoresis microfluidic chip and determination of miRNA-21 in exosome of human plasma / 生物工程学报

We developed a high-efficiency microfluidic chip for extracting exosomes from human plasma. We collected peripheral blood from normal human, designed and fabricated a microfluidic chip based on nanoporous membrane and agarose gel electrophoresis to isolate exosomes. The extracted exosomes were characterized by transmission electron microscopy, nanosight and Western blotting, the morphology, concentration and particle size of exosomes were identified and analyzed. Meanwhile, we used ultracentrifugation and microfluidic chip to isolate exosomes separately. The particle size and concentration of the exosomes extracted by two methods were compared and analyzed, and their respective extraction efficiency was discussed. Finally, the expression level of miRNA-21 in exosomes was analyzed by RT-PCR. The microfluidic chip isolated (in 1 hour) high-purity exosomes with size ranging from 30-200 nm directly from human plasma, allowing downstream exosomal miRNA analysis. By comparing with ultracentrifugation, the isolation yield of microfluidic chip was 3.80 times higher than ultracentrifugation when the volume of plasma sample less than 100 μL. The optimized parameters for exosome isolation by gel electrophoresis microfluidic chip were: voltage: 100 V; concentration of agarose gel: 1.0%; flow rate of injection pump: 0.1 mL/h. The gel electrophoresis microfluidic chips could rapidly and efficiently isolate the exosomes, showing great potential in the research of exosomes and cancer biomarkers.

Rapid generation of double-layer emulsion droplets based on microfluidic chip / 生物工程学报

In vitro compartmentalization (IVC) links genotype and phenotype by compartmentalizing individual genes (including expression system) or cells into a micro-droplet reaction region. Combined with fluorescence-activated cell sorting (FACS), it can detect and separate single droplets in ultra-high throughput. IVC-FACS screening method has been widely used in protein engineering, enzyme directed evolution, etc. However, it is difficult to control the homogeneity of droplet size by mechanical dispersion method in previous studies, which seriously affects the quantitative detection of droplets and reduces the efficiency and accuracy of this screening method. With the rapid development of microfluidic chip manufacturing technology, the microfluidic chip-based methods for droplet generation are becoming more efficient and controllable. In this study, firstly, the water-in-oil (W/O) single-layer droplet generation chip was used to prepare single-layer monodisperse W1/O droplets at a high generation frequency, and then the W1/O droplets were reinjected into water-in-oil-in-water (W/O/W) double-layer droplet generation chip to prepare uniform W1/O/W2 double-layer emulsion droplets. By optimizing the flow rate and ratio of the oil and water phases, a single-layer micro-droplet can be generated with a diameter range from 15.4 to 23.2 μm and remain stable for several days under normal incubation. Then the single-layer droplets were reinjected into the double emulsion generation chip. By adjusting the flow rate of drop phase, oil phase and water phase, the double-layer emulsion droplets with a diameter range from 30 to 100 μm at a rate of 1 000 droplets/s could be obtained. Escherichia coli embedded in the double-layer emulsion droplets could be cultured and induced for protein expression. This study lays a foundation for the establishment of a high-throughput screening method based on the droplet and flow cytometry.

Application of Microfluidics in Molecular Diagnostics / 中国医疗器械杂志

In recent years, molecular diagnostics has been the most promising branch of

High throughput detection and characterization of red blood cells deformability by combining optical tweezers with microfluidic technique / 生物医学工程学杂志

A high throughput measurement method of human red blood cells (RBCs) deformability combined with optical tweezers technology and the microfluidic chip was proposed to accurately characterize the deformability of RBCs statistically. Firstly, the effective stretching deformation of RBCs was realized by the interaction of photo-trapping force and fluid viscous resistance. Secondly, the characteristic parameters before and after the deformation of the single cell were extracted through the image processing method to obtain the deformation index of area and circumference. Finally, statistical analysis was performed, and the average deformation index parameters (

Progress in Automated Urinalysis

New technological advances have paved the way for significant progress in automated urinalysis. Quantitative reading of urinary test strips using reflectometry has become possible, while complementary metal oxide semiconductor (CMOS) technology has enhanced analytical sensitivity and shown promise in microalbuminuria testing. Microscopy-based urine particle analysis has greatly progressed over the past decades, enabling high throughput in clinical laboratories. Urinary flow cytometry is an alternative for automated microscopy, and more thorough analysis of flow cytometric data has enabled rapid differentiation of urinary microorganisms. Integration of dilution parameters (e.g., creatinine, specific gravity, and conductivity) in urine test strip readers and urine particle flow cytometers enables correction for urinary dilution, which improves result interpretation. Automated urinalysis can be used for urinary tract screening and for diagnosing and monitoring a broad variety of nephrological and urological conditions; newer applications show promising results for early detection of urothelial cancer. Concomitantly, the introduction of matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) has enabled fast identification of urinary pathogens. Automation and workflow simplification have led to mechanical integration of test strip readers and particle analysis in urinalysis. As the information obtained by urinalysis is complex, the introduction of expert systems may further reduce analytical errors and improve the quality of sediment and test strip analysis. With the introduction of laboratory-on-a-chip approaches and the use of microfluidics, new affordable applications for quantitative urinalysis and readout on cell phones may become available. In this review, we present the main recent developments in automated urinalysis and future perspectives.

Application and prospect of microfluidic chip in central nervous system diseases / 生物工程学报

In recent years, many human central nervous systems (CNS) of microfluidic platforms and related disease models in vitro have been built with the continuous development of the microfluidic technology and biological microelectronics mechanical systems technology. Microplatforms have emerged to provide a better approximation of the in vivo scenario with better control of the structure, microenvironment and stimuli. This review summarized the basic technology of microfluidic chips in CNS and the application in CNS diseases. In addition, the research of microfluidic chip in CNS diseases has been also prospected. We also highlight challenges that can be addressed with interdisciplinary efforts to achieve more biomimicry.

Development and application of a droplet-based microfluidic high-throughput screening of Pichia pastoris / 生物工程学报

Pichia pastoris is one of the most convenient and widely used heterologous protein expression systems. To further improve its ability to express heterologous proteins, we developed a high-throughput P. pastoris screening method based on droplet microfluidic and demonstrated the method by screening and obtaining mutants with enhanced xylanase expression and secretion abilities. We used PCR (Polymerase Chain Reaction) amplification to obtain a fusion fragment of xylanase xyn5 gene and green fluorescent protein gfp gene, and cloned this fragment into pPIC9K, the expression vector of Pichia pastoris, to construct the plasmid pPIC9K-xyn5-gfp that recombined the DNA fragments of xylanase and green fluorescent protein. After this plasmid entered P. pastoris GS115 by electroporation, the P. pastoris SG strain that could express xylanase and green fluorescent protein was obtained. The above-said strains were then mutagenized by atmospheric room temperature plasma and subsequently encapsulated to form single-cell droplets. After 24-hour cultivation of the droplets, microfluidic screening was carried out to obtain the mutant strain with high xylanase expression for further construction and screening of the next mutagenesis library. After five rounds of droplet microfluidic screening, a highly productive strain P. pastoris SG-m5 was obtained. The activity of the expressed xylanase was 149.17 U/mg, 300% higher than that of those expressed by the original strain SG. This strain's ability to secrete heterologous protein was 160% higher than that of the original strain. With a screening throughput of 100 000 strains per hour, the high-throughput P. pastoris screening system based on single-cell droplet microfluidic developed by the present study screens a library with million strains in only 10 hours and consumes only 100 μL of fluorescent reagent, thus reducing the reagent cost by millions of times compared with the traditional microplate screening and more importantly, providing a novel method to obtain P. pastoris with high abilities to express and secret heterologous proteins by efficient and low-cost screening.

Single Nucleotide Polymorphisms Associated with Alcohol-Induced Flushing Syndrome in Korean Population / 대한법의학회지

Alcohol-induced flushing syndrome is one of the alcohol hypersensitivity reactions commonly found among Asian population. This study was designed to find markers that can predict this particular propensity among Korean population and to assess the applicability of this finding to build a prediction model as forensic DNA phenotyping tool to operate in practical forensic cases. Five hundred seventy unrelated Koreans were genotyped using microfluidic technology with 24 possible candidate single nucleotide polymorphism (SNP) markers. Of the 24 candidate SNPs, four markers, rs671, rs2074356, rs4646776, and rs10849915, on chromosome 12 showed statistically significant association with P-values ranging from 1.39×10⁻¹⁴ to 0.004988 among our subjects. All four markers show relatively high specificity values, ranging from 0.804651 to 0.972093, presenting their capabilities as differential SNPs that can distinguish a person with or without alcohol-induced flushing syndrome. Maneuvering these candidate SNPs as well as finding additional potential markers through future studies will help building an appropriate prediction model for Koreans that can be used as supplementary tool for individual identification.

Neural Stem Cell Differentiation Using Microfluidic Device-Generated Growth Factor Gradient

Neural stem cells (NSCs) have the ability to self-renew and differentiate into multiple nervous system cell types. During embryonic development, the concentrations of soluble biological molecules have a critical role in controlling cell proliferation, migration, differentiation and apoptosis. In an effort to find optimal culture conditions for the generation of desired cell types in vitro, we used a microfluidic chip-generated growth factor gradient system. In the current study, NSCs in the microfluidic device remained healthy during the entire period of cell culture, and proliferated and differentiated in response to the concentration gradient of growth factors (epithermal growth factor and basic fibroblast growth factor). We also showed that overexpression of ASCL1 in NSCs increased neuronal differentiation depending on the concentration gradient of growth factors generated in the microfluidic gradient chip. The microfluidic system allowed us to study concentration-dependent effects of growth factors within a single device, while a traditional system requires multiple independent cultures using fixed growth factor concentrations. Our study suggests that the microfluidic gradient-generating chip is a powerful tool for determining the optimal culture conditions.